|Products Name:||Glass Observation, Panoramic Elevator||Control:||VVVF|
|Machine Room:||Yes||Max Speed:||3.0m/s|
|Min Overhead:||3800mm||Min Pit:||1200mm|
|Motor Type:||Gearless||International Standard:||EN81|
Fuji VVVF Control Observation Elevator , Machine Room Passenger Elevator
|Travel function Standard Function|
|VVVF drive||Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop and gain the sound comfort .|
|VVVF door operator||Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop.|
|Independent running||The lift can not respond to outer calling, but only respond to the command inside the car through the action switch.|
|Automatic pass without stop||When the car is crowded with the passengers or the load is closeto preset value, the car will automatically pass the caling landing in order to keep maximum travel efficiency.|
|Automatically adjust door opening time||Door-open time can be automatically adjusted according to the difference between landing calling or car calling.|
|Reopen with hall call||In the door shutting process, press reopen with hall call button can restart the door.|
|Express door closing||When the lift stops and opens the door, press door-shut button the door will be closed immediately.|
|Car stops and door open||The lift decelerates and levels, the door only opens after the lift comes to a complete stop.|
|Car arrival gong||Arrval tong in the car top announces that the passengers arrive.|
|Command register cancel||If you press the wrong floor command button in the car, twice continuous pressing of same button can cancel the registered command.|
|Photocell protection||In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.|
|Designated stop||If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor.|
|Overload holding stop||When the car is overload, the buzzer rings and stops the lift in the same floor.|
|Anti-stall timer protection||The lift stops operation due to slippery traction wire rope.|
|Start protection control||If the lift does not leave door zone within the designated time after it gets started, it will stop the operation.|
|Inspection operaton||When the lift enters into inspection operation, the car travels at inching running.|
|Fault self-diagnosis||The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation.|
|Repeated door closing||If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated.|
|Up/down over-run and final limit protection||When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. lf the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety.|
|Upward over-speed protection device||When the lift ups 1.2 times higher than rated speed, the device will automatically deceierate or brake the lift.|
|Observation elevator||Observation elevator|
|Car cover||Steel plate baked enamel pressed reinforced bar, acrylic lighting decoration||Creamy white acrylic hood, 3D steel plate model, down lamp|
|Observation wall||Round 6+6 laminated safety glass(3PCS)||6+6 laminated safety glass(3PCS)|
|Decoration ceiling||Baked enamel steel, cylindrical acrylic rystal lamp||Baked enamel steel top panel , central round acrylic lighting decoration, acrylic crystal lamp decoration|
|Car Wall||Hairline stainless steel||Hairline stainless steel|
|Handrail||Stainless steel double tube||Stainless steel tude|
Q1: How can I get the after-service?
A: We will send you the spare parts by free if the problems caused by us.
If it is the men-made problems,we also send the spare parts,but you should pay.
Q2: Do you have inspection procedures for elevator?
A: 100% self-inspection before packing.
Q3: Can I pay by paypal and western union or cash or CNY or credit?
A: Sure,we accept all kinds of payment way.The details you can discuss with us
Q4: What is the delivery time of the parts?
A: Mostly Standard parts we have stock we can deliver after your paymemt confirmed.The non-standard or can
not stock parts we can deliver 25-30 days.
Q5: How to book the parts?
A: You can email us discuss the details after confirming we will make PI for your side and when you receive the
PI pls confirm details by email. and then the payment confirmed we will prepare your order at once
Contact Person: Zhou